THERMAL BLIND WITH PVC OR ALUMINIUM SIDE GUIDES
Thermal Roller Blind is a product designed with full sun protection in mind. Thanks to advanced technologies, a blind with full blackout properties has been created, combined with a thermal coating that increases comfort when staying in sun-exposed rooms.
The Thermal Roller Blind in a PVC cassette is a balance between simplicity and visual elegance. This product was developed in response to customer feedback regarding the most optimal blind housing system. We have created a product that not only meets expectations but also redefines them.
Key benefits:
-
Light control & temperature regulation
-
Easy, no-drill installation
-
Custom-made in Poland
-
Thicker, more durable fabric – approx. 240 ± 10 g/m²
-
Secure mounting – stays firmly in place
-
Perfect for homes, offices, and rentals – non-invasive installation
Thermo Roller Blind Fabric
A specially engineered three-layer fabric: the silver thermal outer layer reflects and blocks sunlight, the middle layer provides complete blackout, and the inner layer adds a decorative finish.
-
Composition: 100% polyester
-
Shrinkage: 2%
-
Light blocking: 100%
-
Fabric weight: 240 ± 10 g/m²
ALUMINIUM CASSETTE
-
Made entirely of high-quality aluminum, significantly more durable than PVC alternatives.
-
Cassette depth of only 35 mm, which greatly increases the opening angle of a balcony window.
-
Option to match the cassette color to the window frame color.
SET CONTENTS
-
Ready-made, pre-assembled roller blind in an aluminium cassette – you can install it yourself in just two minutes
-
High-strength mounting tape for non-invasive installation of the cassette and side guides
-
Screws for invasive (drilled) installation
-
Flat PVC side guides, allowing you to open the window even when the blind is lowered
-
Chain tensioner – keeps the chain hanging straight and properly tensioned
Installation instructions
AVAILABLE FABRIC COLORS
hOW TO MEASURE
To properly fit the blind to your window, please use picture to the right:
-
A – glass width including one seal (this will be the fabric width)
-
B – glass width including glazing beads (this will be the cassette width)
-
C – glass height including both seals
❗️ The difference between dimensions A and B should be at least 3.5 cm.
❗️ For triple-glazed windows, the minimum glass recess depth should be 10 mm.
❗️ The glazing bead should have approx. 10 mm of flat surface for tape installation, if it doesn’t, please use the instructions below.
Windows with round bead without 10mm flat surface, use picture below:
-
A – glass width including both seals (this will be the fabric width)
-
B – glass width including round glazing beads plus 20mm (10mm each side,
this will be the cassette width) -
C – glass height including both seals